Tent Repair | Premium

CASANOVA COLLECTION™

TECHNOLOGY PROVIDER PARTNERS | DISTRIBUTOR

Pro Tent Waterproof Coating Repair | 2008

HIGH-PERFORMANCE FORMULATION | PRODUCTION FORMULA | U.S. OUTDOORS INDUSTRY LEADER

	PU-Coated Nylon Coating Repair
	Waterproofing Coating On Coated Nylon Tent Material Repair
	Waterproof Coating For Inside Layer Of Nylon Material
First Clean The Tent! Eliminate Odors, Mold And Mildew From Tents Without Damaging The Waterproof Coatings; Dip The Tent In MiraZyme Enzyme-Based Odor Eliminator. MiraZyme Will Leave The Tent Scent-Free. Before Heading Out, Test That Tent! Wash It And let Air Dry Setup! Next, Check For Damage, Waterproof Coating Damage, Missing Tent Anchor Tie-Down Lines, Stakes, Pegs, And Stuff Sack? Check The Compression Stuff Sack If One Will Be Used. Repair Worn Waterproof Coating On Coated Nylon Tents And Tent Floors By Simply Applying To A Super Cleaned Surface. Tent Sure Tent Floor Sealant Is A Premium Formula Developed For Professional Production, Professional Outfitter Operators, Rental Shops, And Serious Attitude Consumers. Simply Apply To The Coated Surface Of The Fabric (The Inside Surface) Using A Large Inexpensive Foam Sponge Paintbrush. For Best Results, Apply Tent Sure In A Thin Film, Using Even, Sweeping Motions To Avoid Puddles. A Single Thin Coat Works Best With This Premium Formula.
Tent Seam Repair Tent Floor Repair Apply Seam Grip to the inside of the perimeter floor seam; this seam is not taped at the factory. Draw seam sealer across threads and under folds. Mix Seam Grip with Cotol-240? before applying for 2 hour cure time. Allow tent to dry overnight before using or storing
Convenient precut adhesive-backed repair patches. Available in clear for nearly invisible repairs and black where fabric patches are preferred. Includes four clear patches: 3 inches (8cm) round, or four black patches: 3 inches (8cm) round.
SILNYLON REPAIR \| SIL-NYLON REPAIR Silnylon Is A Newer Higher-Performance Fabric Option, Which Is Completely Different Material And Requires A Completely Different Material For Repair.

TENTSURE

Tent Sure Tent Floor Sealant

Premium Liquid Urethane Formula

+	Premium Formula Developed By A Leading Outdoor-Gear High-Performance Chemical Developer
+	Super Durable
+	Super Thin Application
+	Easy To Apply
+	Consumer Volumes, Repair Shop Volumes, And Wholesale Production Volumes Available

Concentrated, High-Performance, Water-Based Urethane Developed For The Recoating Of Worn Areas On Coated Synthetic Fabrics.

Tent Sure dries to a clear, flexible, long lasting film with a nearly invisible, non-gloss finish. Ideal for tent floors and flys, bivy sacks, rainwear, clothing, fabric accessories and hundreds of items using synthetic fabrics. Available in 8 oz.

Directions For Use:

Clean and dry all surfaces. Remove old sealant with stiff brush and SEAMGRIP? Brand SEAM CLEANER. Shake well before use. Remove inner foil. Pour small amount of TENTSURE into plastic container. Apply a thin film onto fabric with a squeegee or medium-bristle brush. Apply to coated side of fabric (or inside of item). For best results use an even, sweeping motion to avoid puddles or over-application. Some high-wear areas like tent floors may need two applications.

NOTE: Two thin applications are more effective than one thick application. LET TENTSURE DRY FULLY for 24 hours at room temperature before use. Keep treated fabric surfaces separated while drying. Test for dryness before use or folding.

CLEAN-UP AND STORAGE: Wash brush or squeegee with soap and warm water immediately after use; stiff bristles may be loosened with lacquer thinner. Store in a cool, dry place. TENTSURE is freeze/thaw stable and washable/dry-cleanable.

U.S. Retail $8.50 USD

Online

$7.99 Buy

1/2 Case

6 Bottles

$44.99 Buy

Case 12 Bottles

$83.99 Buy

SEAMGRIP

Seam Grip

Seam Grip? Seam Sealer & Outdoor Repair is a waterproof, flexible urethane formula for use in repairing surfaces or sealing seams of natural and synthetic fabrics, waterproof laminates, leather and vinyl. SEAMGRIP may be used to repair all types of waders and footwear, neoprene, PVC, rubber, and more. Concentrated and waterproof, SEAMGRIP offers excellent adhesion, long lasting flexibility, superior traction and abrasion resistance, with minimal shrinkage. Available in 1 oz. Blister Pack and 8 oz.

REP_SeamGrip

U.S. Retail $7.00 USD

1oz Tube

Online

$6.49 Buy

Aquaseal? Urethane Repair Adhesive & Sealant

Repairs all types of wader fabrics and materials including breathables. Provides superior adhesion, wear resistance, flexibility and waterproofing. Repairs can be stretched and folded yet still spring back to their original shape without any damage. Highly concentrated formula provides thick repairs and minimal adhesive shrinkage with only one permanent application. For fast cure, use with Cotol-240? Cure Accelerator. Available in 1 oz. Blister Pack, 1 oz. w/ Cotol-240 Blister Pack and 8 oz.

WADER & BOOT REPAIR

MFG. Directions For Use:
Clean damaged area with Cotol-240? or solvent (paint thinner, nail polish remover or similar). Trim loose threads. Non-fabric surfaces should be roughened with sandpaper, then cleaned. Apply to surfaces directly from tube or with knife or flat stick. Keep repair level overnight. Avoid contact with other surfaces. Most repairs reach full strength overnight (8-10 hours). Allow longer for thickest repairs. Use Cotol-240 for fastest cure (2 hours or less).
HOLES AND TEARS: Create backing with removable tape. Fill void and 1/4" beyond edge with Aquaseal. Remove tape after full cure.
SEAMS: Apply 1/16" thick bead overlapping seam edges by at least 1/4". Apply with slight pressure to saturate fabric surfaces.
HIGH WEAR AREAS: Apply thin coat with knife for flexible abrasion resistance.
WARNING: FULLY CURED AQUASEAL IS SLIPPERY WHEN WET. For added traction on footwear, sprinkle sand on uncured Aquaseal 1/2 hour after applying.
CLEAN UP: To remove Aquaseal from hands, buff with cloth soaked in paint thinner, nail polish remover or 99% isopropyl alcohol.
STORAGE: Advance contents to tube neck. Wipe clean and cap. Keep in cool, dry place or for extended life, place in freezer. For thawing or for easier flowing contents, soak tube in warm water for 15 minutes

U.S. Retail $7.00 USD

3/4 oz Tube

Online

$6.49 Buy

Tenacious? Precut Patches For Instant Repair!

Convenient precut adhesive-backed repair patches. Available in clear for nearly invisible repairs and black where fabric patches are preferred.
Includes four clear patches: 3 inches (8cm) round, or four black patches: 3 inches (8cm) round.

REP_Patches

Tenacious Patches
Directions for Use:

Tenacious Patches hold tenaciously! Our super aggressive adhesive sticks to almost any surface and can be used for a variety of flexible, long lasting repairs at home or in the field! Our non-gloss matte finish on our clear patches is almost invisible, eliminating the need to match colors on fabric and other materials.

Tenacious Patches stop rips from spreading and acts as abrasion resistance on high wear areas of garments and gear. Tenacious Patches can also be used in conjunction with McNett? Urethane Adhesives for ultra strong repairs.

Provides fast, long lasting repairs on synthetic and natural fabrics, fleece, vinyl, rubber and plastic. Ideal for: tents, rain gear, tarps, wind wear, backpacks, gaiters, sleeping bags, gloves, stuff sacks, mats and pads, seats, awnings, soft coolers, tablecloths, PFD's, boat covers, inflatable toys, emergency bicycle tire repairs & more.

Directions: Clean and dry area to be repaired. Trim loose threads. Join torn edges of material. Allow overlap of repair of at least 1 inch (25mm) in all directions. Remove paper backing and apply to damaged area over hard, flat surface. May be applied to outside surface or inside surface depending upon cosmetic preference, or both sides for the highest performance repair. After applying, rub with pressure using circular motion from center out. Item may be used immediately. Adhesive reaches full strength in 24 hours.

Adhesive Option: If more permanent repairs are desired. Tenacious Patches can be used with Seam Grip? or Aquaseal? Urethane Adhesives. If used in this manner, follow adhesive application instructions and overlap the adhesive with Tenacious Patch by at least 1 inch (25mm). Once adhesive is fully cured, the tape may be removed if desired.

Storage and Care: Store unused portion of tape in sealed plastic bag. Tenacious Patches are washable. Do not dry clean